MAHLE X20 System Guia Del Usuario página 26

HMI Errors
Code HMI Description / Action
129
DEMO MODE
HMI demo mode. Assistance goes to 0. If
there is no recovery, go to your dealer.
130
HMI_CONFIGURATION_FAIL
HMI configuration fail. Assistance goes to
0. If there is no recovery, go to your dealer.
132
CAN_TX_ERROR
HMI Communication error. If there is no
recovery, go to your dealer.
133
CAN_RX_BMS
HMI – BMS communication error.
Assistance goes to 0. If there is no
recovery, go to your dealer.
134 CAN_RX_ECU
HMI – ECU communication error.
Assistance goes to 0. If there is no
recovery, go to your dealer.
136
MAIN_BUTTON_DIAGNOSIS
Main button error. Assistance goes to 0. If
there is no recovery, go to your dealer.
137
LEFT_BUTTON_DIAGNOSIS
e-Shifter left button error. Assistance goes
to 0. If there is no recovery, go to your
dealer.
138
RIGHT_BUTTON_DIAGNOSIS
e-Shifter right button error. Assistance
goes to 0. If there is no recovery, go to your
dealer.
139
NOT_CALIBRATED
HMI not calibrated. Assistance goes to 0. If
there is no recovery, go to your dealer.
140
LIMITED_FUNCTIONALITY_IMU
HMI limited functionality. Assistance goes
to 0. If there is no recovery, go to your
dealer.
144 ALS_LIMITED
ALS limited functionality. If there is no
recovery, go to your dealer.
145
LIMITED_FUNCTIONALITY_LED
LEDs limited functionality. If there is no
recovery, go to the dealer.
ANTITHIETF ACTIVE
160
Antitheft mode active.
Battery Errors
Code HMI Description / Action
167
LOW_VOLTAGE_PACK
Battery level too low for correct motor
operation. The user is recommended to
change the battery quickly. Assistance
goes to 0.
LOW_VOLTAGE_CELL
168
Battery level too low for correct motor
operation. The user is recommended to
change the battery quickly. Assistance
goes to 0.
DERRATING_ACIVE_CHARGING
169
High charging temperature. Please place
the battery in a cold environment for
charge. To prevent damage to the battery,
the charging speed has been slowed
down.
DERRATING_ACTIVE_DISCHARGING
170
High battery temperature. To ensure safety,
the engine power will be reduced. Please
deactivate the electric assistance or take a
break while the battery temperature is
decreasing.
IMBALANCE_LIGHT_PACK
171
Imbalance between cells. The capacity of
the battery may be limited. Perform a full
charge of the battery as soon as possible.
USB_OVERLOAD_OR_SHORTCIRCUIT
172
An overcurrent or short-circuit has
occurred in the USB charger line. The bike
can work properly except for the USB line.
If there is no recovery, go to your dealer to
check the conditions of the battery and
auxiliary wiring.
LIGHTS_OVERLOAD_OR_SHORTCIRCUIT
173
An overcurrent or short-circuit has
occurred in the lights line. Check the
condition of the bike lights and the wiring
to the battery. If there is no recovery, go to
your dealer.
BACKUP_OVERLOAD_OR_SHORTCIRCUIT
174
An overcurrent or short circuit has
occurred in the lights line. Check the
condition of the bike lights and wiring to
the battery. If there is no recovery, go to
your dealer. Bike can work properly except
for the lights (Power OFF).
CHARGE_OVERCURRENT
180
An overcurrent occurred during the
charging process. Check that the charger
is in good condition. If the problem
persists, go to your dealer.
DISCHARGE_OVERCURRENT
181
Battery has suffered an overcurrent. This
may be due to the motor demanding more
peak power than the battery can deliver.
Assistance level goes to 0. Reduce the
assistance level and check the wiring. If the
problem persists, go to your dealer.
027