cecotec BOLERO 10700 Manual De Instrucciones página 39

Ocultar thumbs Ver también para BOLERO 10700:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 24
ENGLISH
Fig. 22.
On/off (1)
Press the On/off button to turn the device on and off.
Start/pause (2)
Press the button to start or pause the washing cycle.
Options (3, 4, 5, 6)
Select an additional function, the light indicator will light when selected.
Different types of programmes for different types of laundry.
Display (8)
The display shows the settings, estimated time remaining, options, and status
messages of the washing machine. The display will remain on through the cycle.
Selectable options
DelayStart (4)
Press the Delay button to choose the time (the delaying time is 0-24 h).
Spin speed (6)
Press this button repeatedly to select the desired speed.
Press this button to select the desired temperature (Cold, 20ºC, 30ºC, 40ºC, 60ºC, 90ºC).
Drying level (3)
- Press the Dry button repeatedly to select the drying level (from top to bottom):
Auto dry, Extra dry, Normal dry.
- Auto dry: Select this function to dry clothes automatically.
- Extra dry: Select this function when you put on clothes immediately after drying.
- Normal dry: Normal drying cycle.
Drying advice
- Clothes can be dried after spinning.
- To ensure a quality drying, classify clothes according to fabric type and set the drying
temperature.
- If you want to iron clothes after drying, dry them for more time.
BOLERO DRESSCODE WASH&DRY 10700 INVERTER
76
Clothes not suitable for drying
- Specially delicate clothes like synthetic, wool or silk clothes, clothes with metallic
elements, nylon tights, warm clothes like anoraks, bedspreads, quilts, comforters,
sleeping bags, etc. must not be dried.
- Padded clothes made of foam rubber or similar materials must not be dried.
- Cloths containing traces of hair products or sprays, nail polish remover or other similar
products must not be dried in the appliance to avoid the formation of dangerous vapors.
- Hold down buttons (3) and (4) for 3 seconds, the device will beep indicating the
Child lock function is activated. This function is designed to prevent children from
misusing the appliance.
- When the Child lock is activated and a programme starts, the Child lock indicator will
switch on, and the CL and remaining time on the display are alternately displayed.
- Every time a button is pressed, the Child lock indicator will flash for 3 seconds.
- When a programme finishes, END and the Child lock indicator will be displayed for
10 seconds alternately. Then, the Child lock light will flash for 3 seconds.
- To cancel the Child lock function, hold down both buttons for 3 seconds again.
- The "Child Lock" will lock all buttons except for the Power button and the Child Lock button.
- Deactivate the Child lock function before selecting a programme and starting washing.
Silence
Select this programme to mute the washing machine. Hold down button (5) for 3
seconds, this setting will remain active until it is restarted. To activate the sound again,
hold down the same button for 3 seconds.
Display settings
Fig. 23
These options will light up when selected for a washing cycle.
- HygienePro (1)
When the HygienePro indicator light is on, this function will automatically activate
during the programme. The autowashing function will automatically activate
during every washing cycle in this system. It will always keep your laundry clean.
- Normal dry (2)
- Extra dry (3)
- Automatic dry (4)
- Door lock (6)
- KidLock (7)
BOLERO DRESSCODE WASH&DRY 10700 INVERTER
ENGLISH
77
Tabla de contenido
loading

Tabla de contenido