Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Controls
Models 184 feature 4
Models 143 feature 3
Power (A) The unit functions ON and OFF by pressing the
1
POWER button. Lights on the unit's control panel indicate the
power is ON.
Fan Speed (B) The fan speed can be adjusted by pressing the
2
SPEED button. Press the button to switch between the unit's
speed settings. The turbo (highest) setting is for maximum air
circulation (available on 184 only). Lights on the unit's control
panel indicate the selected speed setting.
Timer (C) The unit has an automatic timer to turn the unit OFF
3
at intervals of 1, 2, 4 or 8 hours. To set the timer, turn the unit
on and select desired speed. Press the timer button until the
desired run time light is illuminated. The unit will continue to
run until that amount of time has expired.
8 English
All manuals and user guides at all-guides.com
A
B
C
speed settings
speed settings
Remote Control This unit comes with a remote control. The
4
remote control functions are the same as the control panel on
the unit. The remote requires a line-of-sight path to allow for
the signal to be received by the unit. Position the unit so the
receiver lens (located above the Vornado logo) is visible from
the remote control. The remote control can be stored with
the Tower Circulator using the magnetic bowl-shaped cradle
located on the top of the product.
Remote Control Battery The remote control comes with a 3
Volt lithium coin cell battery (CR2032). To install, remove the
battery cover on the bottom of the remote control. Remove any
plastic protection from the battery and place it in the remote
with the + side facing out. Then reposition the cover onto the
bottom of the remote. If your remote does not work, please try
replacing with a new 3 Volt CR2032 battery.
Operating Tips
Getting the Most From Your Circulator
Thank you for your purchase. It's important for you to know that this
product functions very differently than typical tower fans you may
have used in the past. Here are a few things to keep in mind:
Expect Powerful Circulation
Your Tower Circulator is designed to move considerably more air than
a traditional tower fan. Consider the following as you adjust product
settings.
Turbo Setting
Ultra-high volume airflow. Increased sound lev-
(184 only)
els may be perceptible due to airflow volume
and velocity.
High Setting
High volume airflow. Rapidly moves air across
the room for efficient cooling. Increased sound
levels may be perceptible due to airflow volume
and velocity.
Middle Setting(s)
Superior circulation power compared to tradi-
tional tower fans on their high setting. May be
preferred for day-to-day use.
Low Setting
Near-silent operation while offering steady cir-
culation.
Cleaning and Storage
How to Clean
The motor is permanently lubricated and requires no oiling.
†
Because your Tower Circulator moves a substantial amount of air, it
will need regular cleaning. To clean follow these simple instructions:
1.
Unplug the unit.
Note:
Do not use gasoline, thinners, solvents or other
chemicals for cleaning
.
2.
Use the brush attachment on your household vacuum
cleaner to vacuum any accumulated dust off the Front
Angled Outlet Grill and Side Inlet Grill. Wipe down the
entire surface with a soft cloth.
Storage
It is recommended to store your Tower Circulator by following these
instructions:
1. Unplug power cord and bundle loosely.
2. Thoroughly clean your Tower Circulator (see instructions above).
3. Cover, or place back in retail carton if available. This will prevent
the unit from accumulating dust overtime.
4. Store unit in a cool and dry location.
English
9
Tabla de contenido
