Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Truth or Myth
SERVICE
Truth or Myth
Truth or Myth?
When the refrigerator is installed, or after re-
for five minutes.
To fill the ice bucket to the maximum capac-
installation.
termine if the filter requires replacement.
The top of the refrigerator doors will always
be aligned.
Refrigerator door handles can be easily
tightened.
There may be odor and taste problems with
your ice.
doors to align them.
installation.
installation.
Refrigerator doors that won't close after
installation, can be adjusted to close properly.
There is an adjustment to rear wheels.
Check for leaks after all water connections
are made.
plug the power cord in at installation.
Any packaging residue can be cleaned off
the refrigerator using any cleaner.
44
All manuals and user guides at all-guides.com
Before you call for service, review the detailed troubleshooting tips in the Owner's manual.
Answer
-
MYTH
MYTH
MYTH
MYTH
MYTH
MYTH
GEAppliances.ca
Explanation
A newly installed refrigerator or water filter contains air in the water
lines. Press the dispenser paddle and dispense cold water for at least
5 minutes to remove air from the water line, and flush the filter.
ice to disperse within the ice bucket, which in turns calls on the ice
in 24 hours.
normal with the bypass plug in place, replace the water filter.
Several things can affect the fresh food door alignment, including the
access the screw.
handles.
After starting the ice maker throw away 24 hours of ice production to
avoid odor and taste problems.
adjust the right hand door. The adjustment screw is located on the
removed do not remove the handles, or if the refrigerator will fit easily
through the passage way opening. Adjust handles that are loose or
removed when necessary to prevent damage from passage way or
access to final location.
reinstalling. See Reinstalling the Refrigerator Doors.
adjustment.
While purging the air from the water system, check all water line
connections for leaks. Check the connection to the household water
supply at back of refrigerator, and door water line connect.
may be slow to give a proper display. Give the refrigerator enough
time to warm up, and the display should be okay.
on Stainless Steel panels, door handles and trim. Check this
GEAppliances.com or calling
49-60741-4
Tabla de contenido
