Protool CCP 380 Manual De Instrucciones página 22

All manuals and user guides at all-guides.com
kniha_Narex_CPP380.book Seite 22 Mittwoch, 31. Oktober 2001 11:53 11
Second step: Adjustment of the cut indicator
to 30°
Third step: Cutting 30°
22
Adjustment of the guide
reglet and guide ruler
Picture 6
Preconditions:
a) Basic adjustment for bevel cut is carried out.
b) Line of the cut is roughed on the cut piece.
Picture 7
2
- Fix the guide reglet (picture 8, pos. 1) in a par-
allel way at a distance apx. 25 cm from the li-
ne.
- Put the guide ruler (picture 8, pos. 2) on the
guide reglet and apply the machine to the cut
piece. Release on the table all the fastening
screws (picture 2, pos. 4) of the guide ruler
and move the machine to the side so that the
line of the cut indicator coincides with the rou-
ghed line of the cut.
- After previous proper adjustment of the ma-
chine (see page 21, Angle adjustment of the
bevel cut) the cut edge is lined up with the rou-
ghed line of the cut.
Picture 8
1