Tabla de contenido
2
1.1
1.2
1.3
1.4
1.5
1.6
All manuals and user guides at all-guides.com
These instructions are important.
Read these instructions carefully before use
and keep them for future reference. Your
child's safety may be affected if you do not
follow these instructions.
Your 3D Pram System is a high quality Silver
Cross product. It meets current British and
European safety standards and care and
regular light maintenance will ensure
long service.
This vehicle is intended for children from birth
and up to 15kg.
If somebody unfamiliar is using your 3D
always ensure that they read these instructions
carefully so that they understand how the
product works best.
The 3D Pram System is designed and tested
to accept the Ventura Plus Car Seat.
Always read all the instructions provided
carefully and remember, the safety of your
child is your responsibility.
Contents
First check all your parts have been supplied.
Your 3D Pram System includes:
1.1
3D Pram System body and chassis
1.2
Pram system liner
1.3
Hood
1.4
Apron
1.5
Footmuff
1.6
Raincover
2.1
2.2
2.3
Preparation for use
Remove all packaging material from your 3D
Pram System.
2.1
To unfold your 3D release the folding
lock by pulling up on each of the
handle catches (marked with a number
1) on both sides of the chassis
simultaneously.
2.2
Whilst holding each of the handle
catches (marked with a number 1), pull
upwards on the main handles. The
pushchair may lift off the fl oor during
this action.
2.3
As the 3D begins to unfold, release the
handle catches and immediately push
down with your foot on the centre of the
main lock to errect your pushchair.
2.4
Ensure that the secondary locks have
engaged on both sides, if not then
gently push down to engage them.
2.5
Your 3D is now erected. If you wish to
use your pushchair as a pram continue,
if you wish to use your 3D as a pushchair
proceed to point 4.1.
WARNING: Ensure that all
locking devices are engaged
before use.
2.4
2.5
silvercrossbaby.com
3
Tabla de contenido
