Tabla de contenido
18
16.1
16.2
16.3
All manuals and user guides at all-guides.com
Attaching your Ventura Plus
Car Seat
16.1
To attach your Ventura Plus, unfasten
the fabric cover on the 3D arms. Lift the
catches inside the arms until they reach
the stop point.
16.2
Position the Ventura Plus in the 3D seat,
do this by firstly positioning the large
opening on the Ventura Plus base over
the bumper bar.
16.3
Lock the handle down towards the
bumper bar, by pressing and holding
down both buttons simultaneously, then
rotating the handle. An audible 'click'
will be heard. Your 3D Travel System is
now ready.
WARNING: Check that
the seat unit attachment
is correctly engaged by
checking both catches
are vertical and locked in
position with the car seat
17.1
17.2
17.3
19
Detaching your Ventura Plus
Car Seat
17.1
To detach your Ventura Plus,
simultaneously press the buttons on
both sides of the car seat handle at the
same time and hold down.
17.2
Rotate the handle to the upright carry
position and lift the car seat out of the
3D.
17.3
Push the car seat locks back into the 3D
arms and re-attach the fabrics back onto
the arms.
silvercrossbaby.com
Tabla de contenido
