Makita EB5300TH Manual De Instrucciones página 22

Retighten loose bolts, nuts, etc.
Check for fuel and oil leakage.
Replace damaged parts with new ones for safety
operation.
Keep engine clean by wiping down with a cloth
rag.
heat and piston seizure.
Blowing air is taken in from the air inlet vent.
stop engine and inspect the air inlet vent for
any blockages. Clean it if necessary. Such a
blockage may cause overheat and damage the
engine.
Replace gaskets and packings if the engine is
disassembled.
Any maintenance of adjustment work that is not
included and described in this manual is only to
be performed by Authorized Service Agent.
WARNING:
Failure to do so may cause burns or
CAUTION:
Drain fuel from the fuel tank and carburetor
Remove the fuel tank cap, and drain fuel
completely. If there is any foreign materials
remaining in the fuel tank, remove it completely.
using a wire.
Push the primer pump until fuel is drained
-
from there, and drain fuel coming into the fuel
tank.
tighten the fuel tank cap.
Then, continue to operate the engine until it
stops.
Remove the spark plug, and drip several
drops of engine oil through the spark plug hole.
Gently pull the starter handle so that engine
oil will spread over the engine, and attach the
spark plug.
Keep the machine with its carry handle
upside.
Keep the drained fuel in a special container
in a well-ventilated shade.
22 ENGLISH