Makita EB5300TH Manual De Instrucciones página 18

1
2
3
Drainage hole
(aluminum washer)
ket Oil port
Put the blower down on a level surface.
Put a waste oil container under the drainage
hole to catch the oil as it drains out. The con-
Loosen the oil drain bolt to let the oil drain
out. Be careful not to allow oil to get on the fuel
tank or other parts.
NOTICE:
Remove the oil cap. (Removing the oil cap
allows the oil to drain easily.)
NOTICE:
As the level of the oil being drained
decreases, tilt the blower over on to the side with
the drain so that the oil will completely drain out.
After the oil has completely drained out,
tighten the oil drain bolt securely. If the bolt is not
tightly fastened, it may result in oil leakage.
NOTICE:
gauge.
4
5
6
Oil drain bolt Gasket
Oil cap Oil cap gas-
Upper limit mark
securely to prevent oil leaks.
NOTICE:
WARNING:
PROHIBITED
Daily (every 10 operating hours)
-
2
1
Knob bolts
Breather
Loosen the knob bolts.
18 ENGLISH
Lower limit mark
INFLAMMABLES STRICTLY
3
4
Air cleaner cover
1
2
Element