Makita EB5300TH Manual De Instrucciones página 19

Remove the air cleaner cover.
Remove the element and clean off any
dirt from the element with a cloth or air blow.
Replace the element with a new one if it is dam-
aged or very dirty.
NOTE: The element is a dry type and should
not get wet. Never wash with water.
Wipe off any oil around the breather with a
rag or cloth.
Install the element in the air cleaner case.
Attach the air cleaner cover and tighten the
knob bolts.
NOTICE:
NOTICE:
CAUTION:
trical shock may result.
CAUTION:
CAUTION:
Otherwise electrical shock may result.
NOTICE:
NOTICE:
NOTICE:
angle, the threaded hole in the cylinder will get
damaged.
To open the plug cover, lift it and make a
half turn of it.
Otherwise elec-
If installed at an
1
Plug cover
Use the box wrench provided as an stan-
dard accessory to remove and install the spark
plug.
The appropriate clearance between two
it is too wide or too narrow.
Clean thoroughly or replace the spark plug if it
has accumulated carbon or contaminated.
For replacement, use NGK CMR6H.
19 ENGLISH