Idiomas disponibles
Idiomas disponibles
6.
To release the carpet glider, place foot on clip
and push down. Lift steam cleaner to unhook
and remove.
MAINTENANCE
This steam cleaner contains no user
serviceable parts. Do not try to repair it
yourself.
If steam cleaner is not working as it should,
has been dropped, damaged, left outdoors, or
dropped into water, call Customer Service at
1-800-944-9200 prior to continuing use.
IMPORTANT: Allow the steam cleaner to fully
cool down before performing any maintenance or
troubleshooting checks.
REMOVING CLEANING PADS
WARNING:
To reduce the risk of
personal injury - Unplug Steam Cleaner before
servicing and allow to cool.
IMPORTANT: Never use bleach or fabric softener
when washing the pad.
TROUBLESHOOTING
WARNING:
To reduce the risk of personal injury - Unplug Steam Cleaner before servicing and allow cooling.
This Steam Cleaner contains no user serviceable parts. Do not try to repair it yourself.
If steam cleaner is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, call Customer Service at 1-800-944-9200 for further instruction prior to continuing use.
USE TROUBLESHOOTING GUIDE AS A FIRST STEP TO RESOLVE ANY PROBLEMS YOU MAY BE EXPERIENCING.
PROBLEM
POSSIBLE CAUSE
1. No voltage in wall plug.
Steam Cleaner won't run
2. Blown fuse or tripped breaker.
3. Steam cleaner may not be plugged into the electrical outlet correctly.
4. The electrical outlet may not be working properly, check the fuse or breaker, or consult an
electrician.
5. The power cord may be damaged.
6. Does not turn on.
Steam Cleaner not producing steam 1. Water Tank may be empty.
2. Water Filter may be clogged and needs to be replaced.
3. Thermal protector may turn off pump if trying to operate steam cleaner before steam indicator
is illuminated.
4. Steam path may be blocked.
5. Hard water filter not installed.
1. The cleaning pad may already be saturated with dirt and needs washing.
Microfiber pad doesn't pick up dirt
1.
Hold corner of pad down with foot and lift steam
cleaner to peel away.
2.
All cleaning pads are machine washable on
WARM setting. For best results lay flat to dry.
Allow to fully dry before use.
REPLACING THE HARD WATER
FILTER
1.
Place fingers and grip side clips of the hard water
filter to remove.
2.
New filter has a (beige/cream color).
3.
Ensure the hard water filter is properly snapped
back in place when performing maintenance.
4.
Hard water filter should be replaced every 6-8
months or when discolored.
WHAT TO BUY:
Contact a HOOVER
customer service
®
representative at 1-800-944-9200 for
replacement details:
Part # 440015397 or visit www.hoover.com.
POSSIBLE SOLUTION
1. Check fuse or breaker in home.
2. Replace fuse or reset breaker in home.
3. Ensure the plug is pushed in securely.
4. Check fuse or breaker in home. Replace fuse/reset breaker in home.
5. If cord is damaged, contact Customer Service at 1.800.944.9200.
6. Check the On/Off switch to make sure it is in the On steam control dial is turned between the
MIN and MAX Steam line.
1. Please refer to the "Filling Tanks" section.
2. Check Water Filter and clean or replace.
3. Unplug steam cleaner and allow to cool down.
4. Please refer to the "Clearing Blockages" section.
5. Ensure hard water filter is properly snapped back in place when replacing or performing
maintenance. Refer to "Replacing the Hard Water Filter" section.
1. Wash or replace with clean pad. Please refer to the "Removing Cleaning Pads" section.
CLEARING BLOCKAGES
WARNING:
To reduce the risk of
personal injury - Unplug Steam Cleaner before
servicing and allow to cool.
1.
Unplug the unit.
2.
To remove the floor head from the body push the
floor head release button and lift.
3.
After the floor head is removed, use a thin object
such as a paper-clip (in the area shown), to
remove the blockage.
4.
With the pad removed from the floor head, insert
a small thin object such as a paper-clip in to the
steam holes to remove a blockage.
