Vermeiren Albatros Manual De Instrucciones página 8

EN
NL
3.1.4 Leg support
CAUTION
 Do not drop the leg support on the patient when adjusting.
3
The leg supports can be adjusted in depth and 5 different heights.
2
3.1.5 Raising and lowering the cantilever arm
The manual control allows the cantilever arm to be adjusted
smoothly to any point.
When using the lift function until the end of the hoist motor, the limit
switch is activated by electronics (security function). Use the lifting
function only in the middle of the adjustment range.
Risk of injuries
The leg support  can be mounted on the bar of the patient hoist
2
1
 with the safety pin .
The leg support is meant to keep the legs of the patient in the
correct position and to support the legs of the patient while
standing up.
1 = Bar for height adjustment
1
2 = Lever for depth adjustment
1
= Raise the cantilever arm
2
= Lower the cantilever arm
Height from footplate to top
of leg support
520 mm
495 mm
470 mm
445 mm
420 mm
6
Albatros
2022-07
Using the patient hoist
Position
Hole 1
Hole 2
Hole 3
Hole 4
Hole 5
1
2