Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TECHNICAL DATA
TYPE
Voltage
V
Frequency
Hz
Power
W
Motor
Tank Capacity
L (Gallons)
Hose diameter
in (mm)
Hose length
in. x Ft.
Weight
kg (lbs)
PROBLEM
Motor does not run
Suction capacity decreases
Vacuum stops running
Dust comes out while vacuuming
DWV112
AR
B2
B3
BR B2C
220
220 120 127 220
50
60
60
60
1250
Single Stage
12
2-1/2" (63,5)
2 1/2 x 7
11,3 (25)
TROUBLESHOOTING
Check power cord, plugs and outlet.
Ensure the on/off switch is in the ON position (I)
Remove blockages in the suction nozzle, suction tube, suction hose or filters
Replace the paper or fleece bag
Check for proper installation of the filters.
Clean or replace the filters.
Empty canister, refer to Emptythe tank under Operating.
Thermal overload has been tripped:
1. Turn the vacuum off and disconnect vacuum cleaner from power source.
2. Empty the canister, if needed.
3. Allow the unit to cool.
4. Plug the power cord into an appropriate outlet and turn on/off switch to the
ON position ( I) to test. If vacuum will not restart call 1-888-899-0146
Check for proper installation of the filters.
Ensure filters are not damaged; replace if necessary.
Ensure filter seals are in place and are secure.
Troubleshooting
WARNING: to reduce the risk of injury from
moving parts and/or electrical shock, turn
power switch off and disconnect grounded
plug from electrical outlet before performing
troubleshooting checks.
50
Minor problems often can be fixed without calling customer
service
POSSIBLE SOLUTION
ENGLISH
25
Tabla de contenido
