Lionelo Koen Manual De Usuario página 5

PRODUCT OUTLINE
see fig. 1
A.
Seat
B.
Tray
C.
Upper front leg (with
a footrest screw hole)
D. Footrest
E.
Lower leg
HOW TO ASSEMBLE CHAIR
Before you start assembling, make sure you have all parts and that they are not
damaged.
1.
Screw two upper front legs (with a screw hole) and two rear legs (without
holes) to the seat. Tighten front legs up so that footrest screw holes are
positioned to the front (fig. 2).
2.
Put the footrest on the front legs, previously screwed into the seat (above
the screw holes) (fig. 3).
3.
Screw lower legs to upper legs. You can adjust the level with feet.
4.
Insert the tray into the seat until you can hear a distinctive click (fig. 4).
5.
To have a lower chair variant (fig. 5):
•
unscrew lower legs,
•
unscrew adjustment feet from lower legs,
•
screw feet to upper legs on.
SAFETY BELTS
How to assemble and disassemble belts
NOTE! If you use a high chair, always fasten safety belts!
1.
To fix belts, carry belts through relevant holes in the seat (fig. 6).
2.
Pull the belt and make sure it has been properly locked in the seat.
3.
To dismount the belt, straighten the belt lock and gently push through the
hole in the seat (fig. 7).
F.
Safety belt
G. Upper rear leg (without
a footrest screw hole)
H. Adjustment foot
I.
Footrest mounting screw
J.
Mounting connectors
‑ 5 ‑ EN