7.2
WARRANTY
This machine has been designed and manufactured using the most modern techniques. The manufacturer guarantees its products
for 24 months from the date of purchase, for private and hobby use. The warranty is limited to 12 months in case of professional use.
Limited warranty
1) The warranty period starts on the date of purchase. The manufacturer, acting through the sales and technical assistance network,
shall replace free of charge any parts proven defective in material, machining or manufacturing. The warranty does not affect the
purchaser's rights as established under legislation governing the consequences of defects in the machine.
2) Technical personnel will undertake the necessary repairs in the minimum time possible, compatible with organisational needs.
3) To make any claim under the warranty, this certificate of warranty, fully completed, bearing the dealer's stamp and
accompanied by the invoice or receipt showing the date of purchase, must be displayed to the personnel authorised to
approve work.
4) The warranty shall be null and void if:
- the machine has evidently not been serviced correctly
- the machine has been used for improper purposes or has been modified in any way,
- unsuitable lubricants and fuels have been used
- non-original spare parts and accessories have been fitted
- work has been done on the machine by unauthorised personnel
5) The warranty does not cover consumables or parts subject to normal wear.
6) The warranty does not cover work to update or improve the machine.
7) The warranty does not cover any preparation or servicing work required during the warranty period.
8) Damage incurred during transport must be immediately brought to the attention of the carrier: failure to do so shall render the
warranty null and void.
9) Engines of other manufacturers (Briggs & Stratton, Subaru, Honda, Lombardini, Kohler, etc.) fitted to our machines are covered
by the warranties of the engine manufacturer.
10) The warranty does not cover injury or damage caused directly or indirectly to persons or things by defects in the machine or by
periods of extended disuse of the machine resulting from the said defects.
MODELO
N° DE SERIE
ADQUIRIDO POR EL SR.
¡No expedir! Adjuntar sólo al pedido de asistencia técnica.
8
POST-SEASONAL MAINTENANCE,
PUTTING THE MOWER OUT OF OPERATION
After the end of the season or if you will not be using your riding mower for more than 30 days, make sure to prepare your mower for
storage as soon as possible. If fuel remains in the petrol tank without movement for more than 30 days, a sticky deposit may form,
which can have a negative effect on the carburettor and cause poor engine operation. For this reason empty the petrol tank.
Never store the riding mower with a full petrol tank inside of buildings or poorly ventilated areas, where there are fuel
vapours, open flames, sparking or lighting flames, furnaces, central heating, dry rags, etc. Handle fuels and lubricants with
care, they are highly flammable and careless handling may lead to serious burns or damage to property.
Only empty the petrol tank into approved containers outdoors away from open flames.
Recommended procedure for preparing the riding mower for storage:
► Thoroughly clean the entire mower, especially inside the mowing deck (
Never use petrol for cleaning. Use degreasing agents and warm water.
► Repair and paint dinted places to prevent corrosion from occurring.
► Replace faulty or worn out parts and tighten all loose nuts and bolts.
FECHA
CONCESIONARIO
6.2.2).
67