Record; Line Output - auna TT186E Manual Del Usuario

RECORD

Note: Remove the needle guard. Detach the tone arm from the holder
before use and reattach it to the holder after use.
1. Set the function selection button (7) to "Phono".
2. Use the speed controller to set the speed.
3. Place the record on the turntable (use the spindle adapter if necessary).
4. Raise the tone arm and move it slowly to the edge of the record. The
turntable starts to spin.
5. Place the tone arm on the desired position of the record.
6. Control the volume.
7. Once the record is finished, the turntable stops automatically. Now lift
the tone arm and place it on the holder.
8. To stop the turntable manually, lift the tone arm and place it on the
holder.
Note: If the record has auto-stop ranges and auto-stop is active, the
turntable will stop before the record ends. (To activate the auto-stop
function, switch off the unit and turn on the auto-stop switch (28)). Now
start the playback.

LINE OUTPUT

You can connect the device to an existing hi-fi system using a cinch cable.
Use the line output (26) for this purpose
EN
25