Create Mp3 Files From Record - auna TT186E Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

EN
24

CREATE MP3 FILES FROM RECORD

The device can create MP3 files from vinyl and store them on USB or SD/
MMC card.
A. Record encoding
1.
Connect a USB memory device with sufficient free space.
2. Select the function "Phono" (7) and then immediately press "Record" (3).
3. The LCD display (2) displays a flashing "USB" and then during encoding
or
and
4. Start playback of the desired record titles.
5. Press "Record" (3) to finish, the display stops flashing and shows
"Phono".
Notes:
The recording speed is 1:1 in relation to the playback time.
The device generates a folder for encoding.
The recording format is preset - MP3 bit rate: 128 kbps, 44.1 khz.
No title is recorded during encoding.
To discontinue the recording, press "Record" again.
The files are saved on USB if a USB and memory card are inserted.
Since encoding to USB is set by default, errors may occur if you want
to encode to SD and a USB memory is connected. Therefore, do not
connect a USB memory device during this time.
B. Title separation (via remote control)
You can divide the music recorded from vinyl to USB/SD in tracks. Each time
you press " ", a new file/title is created. The text "PHONO"" flashes briefly on
the display (2) to confirm.
Removing from USB/memory card
To remove a storage medium, the device must first be switched off or
switched to another mode, e.g. CD, cassette, record. Unplug a USB memory
or pull the memory card straight out of the card slot.
.
Tabla de contenido
loading

Este manual también es adecuado para:

10006239

Tabla de contenido