EN
20
INSERT BATTERIES
•
The battery compartment is located on the back of the remote control.
•
Remove the cover by pressing the lever.
•
Insert 2 AAA batteries (not included) into the compartment. Please note
the polarity.
•
Put the cover back in place.
GETTING STARTED
•
Unpack the device and all parts and remove the protective packaging
and foils.
•
Do not connect the device to the power source until all other necessary
connections have been made.
•
Do not cover the air vents. Please make sure that there are a few
centimetres of clearance on all sides of the device.
Power connection
Connect the power cable (29) to a power socket. Set Off/Function (7) to
"PHONO" or "USB/SD". The power LED (5) switches on. The device is now
ready for operation and can play music.
LISTENING TO THE RADIO
Manual adjustment
Set the function selection button (7) to "Tuner" and select the desired tape
with the tape selection switch (10). Rotate the frequency control (19) to
obtain the desired station. Adjust the volume with the volume controller (18).