Record Playback; Bt Connection - auna TT-Play SE Manual De Instruciones

RECORD PLAYBACK

1. Switch on the device. Place a record on the turntable. If necessary, place
an adapter on the rotary axis.
2. Adjust the playback speed (33, 45 or 78 rpm depending on the record)
with the speed control knob
3. Lift the tonearm with the lift lever from the tonearm holder. Slowly
move the tonearm over the record - this will cause the turntable to spin.
4. Use the lift lever to slowly lower the tonearm to the desired position on
the record. Playback will then start.
5. When the record is completely played back, the tonearm is
automatically lifted off the record. Use the lift lever to move the
tonearm back to the tonearm holder.
6. Playback of the record can be interrupted manually by using the lift
lever to move the tonearm back to the tonearm holder during playback.
Note: Never stop the turntable manually. Do not move the turntable
to another location until the tonearm has been securely fixed to the
tonearm holder, otherwise the tonearm may be damaged.
After playback
• Use the lift lever to move the tonearm back onto the tonearm holder.
• Put the protective cap back on the needle and fix the tonearm on the
tonearm holder.

BT CONNECTION

1 Turn the function switch to the BT position, the blue indicator light starts
flashing.
2 Turn on BT on your external device (e.g. smartphone) and search for
devices.
3 On your external device, select the BT pairing name of the record player.
4 Once you are connected to the record player, the blue indicator light
stops flashing. You can now play music from your device through your
turntable. Use the volume control to adjust the volume.
EN
19