Setup And Operation; Main Connection; Amplifier Connection; Playing A Record - auna ClearTech Record Player Manual De Instrucciones

EN
18

SETUP AND OPERATION

Main connection

Ensure that the main voltage of your home corresponds to the operating
voltage of the unit. Your unit is ready to be connected to a main voltage of
5 V⎓ 1 A.

Amplifier connection

Connect audio plugs to input on your mixer or amplifier:
• Red plug into R/H channel input.
• White plug into L/H channel input.

Playing a record

• Place the record of your choice on the turntable. If it is a 45rpm, do not
forget to place the adapter on the record spindle.
• Choose the desired playing speed using the Speed Select Switch
• (33.3, 45 or 78 rpm).
• Turn on the rotary power switch.
• Release the tone arm lock.
• Push the arm lightly towards the center of the turntable.
• Place the stylus vertically over the first track of the record. The turntable
will start turning automatically.
• When a record comes to the end, the turntable will stop automatically
if the Auto-Stop switch is in the ON position. If the switch is in the OFF
position, then it will be suitable for Long Play records.

Bluetooth function:

• When the tonearm landed on the armrest, after power turned on, the
Bluetooth function will be activated automatically.
• Open the BT operation settings in mobile device (within 10 meters) and
find the device "ClearTech".
• After the it matched successfully, user can play music on mobile device
and sound will out from the turntable speakers.
NOTE:
• Lift up the tone arm and put it on the rest.
• Replace the protective cap on the stylus and close the tonearm lock.
• Turn off power at mains.

Operation the built-in LED light

User could open/close the LED light by operating the switch to the rear