Tabla de contenido
Idiomas disponibles
Idiomas disponibles
OPERATING INSTRUCTIONS
!!! IMPORTANT !!!
The water tank MUST be filled with water before use: see previous chapter!
To ensure better reliability it is highly recommended to use decalcified or distilled water!
The markings for min/max water levels must be respected!
Empty the water tank and fog liquid tank before each transport and after each use
•
Put the fogger on a flat and very stable surface and activate the brakes on the wheels.
•
Use standard fog liquid to fill up the fog fluid canister. Close the canister to prevent dirt to
enter the reservoir!
•
Fill up the big water tank with distilled or decalcified water. On the inside of the tank there
are several level indications: fill the tank until the water level is between the minimum and
maximum lines. (+/- 10 to 15 liters). The water level indicators (9+10) will turn from [MIN]
to [OK]
•
Connect the fogger to a mains wall socket with earth connection
•
Switch the fogger on and wait for about 2 to 3 minutes. (warm up time)
•
You can now use the machine via the build-in timer or it can be controlled by DMX. (see
below)
5
Tabla de contenido
