Continuity Measurement; Diode Test - Steinberg Systems SBS-SMD-2999 Manual De Instrucciones

D. To select the "AUTO" manual measurement range, select the "AUTO"
function with the "FUNC" button. The display will show "AUTO" and the
capacitance measurement unit "F".
E. Read the measured measurement on the display.
FUNCTION
CAPACITY

4.3. Continuity measurement

A. Set the slide control (4), in R/D/C (Resistance, diode, capacitance) position.
B. Select "SCAN" mode with "FUNC" button.
C. Attach the probes to the tested component, if the resistance indicates a result
below 30Ω, the meter will automatically switch to the circuit continuity
measurement mode.
D. To set the circuit continuity measurement manually, press the "FUNC" button
until the symbol (D) appears on the display.
Then attach the probes to the component under test.
E. If the resistance falls below 30Ω, the meter will generate a sound signal, while
for an open circuit the meter will show the symbol "OL" on the display.

4.4. Diode test

A. Move the slide control (4) to the middle position and select the "ZENER/LED"
symbol.
RANGE
3nF
30nF
300nF
3μF
30μF
300μF
3mF
30mF
RESOLUTION
1pF
10 pF
100 pF
1nF
10nF
100nF
1μF
10μF
ACCURACY
±(2.5%rdg+3dgt)
±(3%rdg+3dgt)