Preparation For Operation; Working With The Unit - Steinberg Systems SBS-SMD-2999 Manual De Instrucciones

C. Database light
D. Continuity check mode light
E. Diode test mode light
F. Voltage unit indicator light
G. Unit indicator light (nF, μF, mF)
H. Resistance unit indicator (Ω, KΩ, MΩ)
I. Battery status indicator light
J. DC/Avar Selector light
K. High Voltage Indicator

3.2. Preparation for operation

POSITIONING OF THE UNIT
The ambient temperature must not exceed 40°C and ambient humidity should not
exceed 80%. Ensure that the power supply to the unit corresponds to that specified
on the identification plate!
CAUTION! Do not exceed the overload protection limits.

3.3. Working with the unit

1. Before using the unit, install the battery, press the "FUNC" button.
To turn off the unit, set the function slider (4), to the "R/D/C" range and press
the "FUNC" button for 2 seconds.
2. The "HOLD" button can be used to stop the display.