Safety - CEVIK TSW1000CAR Manual De Instrucciones

SAFETY

To be sure that the welder is used safely it must be installed by qualified personnel who will comply with all
the instructions outlined in this manual.
Service the machine by closely adhering to the safety warnings in this chapter and in the "MAINTENANCE" chapter.
Keep in mind that maintenance should be performed after the generator has been turned off for at least 5
minutes and with the plug disconnected from the mains due to the presence of the capacitors. The only
exception is when specialized personnel run the electrical measurements.
It is advisable that skilled personnel run the process or anyone who operates the machine must be aware of any
risks and must have carefully read and understood this manual.
The machine is to be adjusted exclusively by personnel authorized to do this job. Machine adjustments affect both
operating safety and work quality therefore the person who performs said adjustments must possess the required
skill and competence. As such, fully and duly comply with the instructions in the "WORK" chapter.
Not more than one person at a time is allowed to operate this machine therefore access to the work area is
prohibited to personnel who are not unauthorized to use this machine.
Keep in mind that this machine generates strong magnetic fields that might heavily attract magnetic metals and
damage objects such as watches, magnetic cards or data magnetic mediums.
People with pacemakers are not allowed to go near the welding area but if they need to do so they should first
consult their physician.
Therefore always keep in mind the guidelines outlined in this section as well as all the prevailing regulations.
The machine is supplied complete with cable and plug with ground connection. Should you need to replace the plug,
use one with like capacities and make sure specialized personnel perform the replacement.
The connection to the conductor that protects the system is compulsory at all times.
32