Lionelo Bastiaan One Manual De Usuario página 17

They help you stick ISOFIX fasteners when car connectors are
hard to access.
b.
Position the child safety seat on the car seat in a forward-facing position.
c.
Press ISOFIX button to pull out both ISOFIX arms. Grab the child
safety seat and slide both ISOFIX arms into fasteners located in the car
seat until arms engage and you can hear a distinctive „click" (fig. 22).
d.
Push the child safety seat against the car seat as far as you can. The
marker on both sides of ISOFIX arms should turn from red into green.
CAR SEATS (required)
Fig. 23
1 – make sure this belt goes behind the headrest, under seat liner,
just by the child safety seat backrest.
2 – make sure this belt goes under the seat liner.
a.
Position the child safety seat on the car seat in a forward-facing position.
b.
Pull the car seat and carry its shoulder part between the headrest
and backrest of the child safety seat (fig. 23).
c.
Carry the hip part of the car seat along the child safety seat backrest
and then through the guide (marked as 15 in fig. 3) (fig. 23).
d.
Fasten the belts. Press the child safety seat against the car seat.
Tighten the belts as showed by arrows in figure 23.
e.
Move the child safety seat to check if it has been securely fixed. If
fixing of the child safety seat is unstable, adjust belt tension.
f.
Put the child in the child safety seat and secure with its safety belts.
4. Forward-facing position with seat belts or seat belts
and ISOFIX connectors or seat belts, ISOFIX connectors
and TOP TETHER (groups II, III)
Important: for this group disassemble 5-point safety belts. The child
must be secured with car seat belt.
‑ 17 ‑ EN