Attach The Guard; Assemble The Shaft; Install The Battery Pack; Remove The Battery Pack - Powerworks XB 20V Manual Del Operador

WARNING
• If the parts have damage, do not use the machine.
• If you do not have all the parts, do not operate the
machine.
• If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
8.2

ATTACH THE GUARD

WARNING
Do not touch the cut-off blade.
1. Remove the screw from the trimmer head with a
Phillips head screwdriver (not included).
2. Put the guard (1) onto the trimmer head.
3. Align the screw hole (2) on the guard with the screw
hole (3) on the trimmer head.
4. Tighten the screw.
8.3

ASSEMBLE THE SHAFT

1. Push in the rotating handle latches on the lower
shaft (2) .
English
3
2
1
3
2. Align the latches (1) with the positioning holes (3)
and slide the two shafts.
3. Turn the lower shaft until the latches locks into the
positioning holes.
4. Insert the screws into the shaft.
5
5. Tighten the screws (5).
8.4

INSTALL THE BATTERY PACK

WARNING
• If the battery pack or charger is damaged, replace
the battery pack or the charger.
• Stop the machine and wait until the motor stops
before you install or remove the battery pack.
• Read and understand the instructions in the
battery and charger manual.
1. Align the lift ribs （2） on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
8.5

REMOVE THE BATTERY PACK

1. Push and hold the battery release button (1).
2. Remove the battery pack from the machine.
7
4
2
1
2
EN
1