Pre-Installation Checklist - Link DURALIFT II Instrucciones De Instalación

4.9 WARNING
Proper tightening of fasteners is important to the
performance and safety of the suspension. Follow
all torque specifications throughout the instructions.

5. PRE-INSTALLATION CHECKLIST

Verify that the axle spacing to be used conforms
to Federal and local bridge laws.
Verify that the frame width matches the suspen-
sion specifications (33.50'' to 35.00'').
Verify that adequate air supply exists to support
braking requirements for the lift axle being in-
stalled.
Verify clearance between the drive shaft and the
liftable suspension, with the axle lifted and lowered.
Verify tire clearance in all directions, with the
axle lifted and lowered.
Verify air spring clearance in all directions, with
the axle lifted and lowered.
FRAME KIT 8A000491
FRAME KIT 8A000493
Verify suspension clearance with truck compo-
nents.
6. FRAME BRACKET KITS:
There are 4 frame bracket kits available to allow for
a wide range of ride heights. The ride heights vary
for the 8K suspension vs. the 13.2K suspension.
See charts on Pages 4 and 5 for details.
FRAME KIT 8A000492
FRAME KIT 8A000494