Tabla de contenido
structions in the User's guide supplied with
this manual.
cooking function.
I have turned the control dial to position
and selected a pyrolysis programme
quickly and a buzzer sounds
the door cannot be locked and the pyro-
lytic process has been blocked.
erly closed. Then set the control dial to the
position and repeat the sequence to ac-
tivate the pyrolysis.
I have turned the control dial to position
and selected a pyrolysis programme
not light up and the oven does not heat
up
though the door is properly closed.
partment as there is a fault in the door
switch.
Technical specifications
If these problems persist despite these tips,
contact the Technical Service Department.
42
Installation & Maintenance
-
The pyrolysis programme has ended and
and symbol
The control dial is in position
door is still locked
temperature limit.
-
does
-
Inform the Technical Service Department of the
kind of problem you are experiencing and give
1.
2.
plate which is on one side of the opened door.
when the pyrolysis programme ended.
goes off.
.
and the
Capítulos
Tabla de contenido
