Tabla de contenido
Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
Installation instructions
Dear Customer,
Congratulations on purchas-
ing this STEINEL Infrared
Sensor and thank you for
the confidence you have
shown in us. You have
chosen a high-quality
product that has been
System components
Security screw
Front cover
Lens (can be removed
and turned for selecting
the max. basic reach
settings of 5 m or 12 m)
Technical specifications
Dimensions:
Output:
Connection:
Detection angle
Sensor reach:
Time setting:
Light threshold:
Enclosure:
12
manufactured, tested and
packed with the greatest
care.
Please familiarise yourself
with these instructions
before attempting to install
the sensor since prolonged
reliable and trouble-free
Light threshold setting
control 2–2000 lux
Time setting control
10 sec.–15 min.
(H x W x D) 120 x76 x56 mm
1000 watts max. (resistive load, e.g. filament bulb)
500 watts max. (uncorrected, inductive,
cos φ = 0.5, e.g. fluorescent tubes)
900 watts max. (series compensation)
500 watts max. (shunt compensation,
at C = 45.6 µF)
600 watts max. (electronic ballasts, capacitive
e.g. low-energy lamps, 8 each max.)
230 - 240 V, 50 Hz
180° horizontal, 90° vertical
basic setting 1: 5 m max.
basic setting 2: 12 m max. (factory setting)
+ precision adjustment from 1 - 12 m by means
of clip-on shrouds
10 sec. – 15 min. (factory setting: 10 sec.)
2–2000 lux (factory setting: 2000 lux)
IP 54
operation will only be
ensured if it is installed
properly.
We hope your new Infrared
Sensor will give you lasting
satisfaction.
Clip (housing can be
flipped up for assembly
and connection to mains
power supply)
Tabla de contenido
