A&D FG-CWP Serie Guia De Inicio Rapido página 4

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 27
EN
1. Introduction
This quick start guide describes the basic functions and operations of the balance.
The functions and operating procedures of the scale (FG-CWP series) are explained in details in
the following instruction manual.
[FG-CWP Series Instruction Manual]
This is an instruction manual for understanding and fully utilizing the water proof digital platform
scale FG-CWP series. This manual can be downloaded from our website https://www.aandd.jp.
2. Cautions
2.1. Precautions for Installing the Scale
DANGER
□ Ground the scale, so that the user will not be subjected to an electric shock.
□ To prevent electric shock, do not handle the USB cable with wet hands.
□ The USB cable is not waterproof. Install the scale in an area where it will not get wet.
□ Do not install the scale where flammable or corrosive gas is present.
□ Do not put excessive force on cables.
□ The scale is heavy. Use caution, as lifting may cause it to fall over.
Consider the following installation conditions to get the greatest performance
from your scale.
□ The ideal conditions for installation are stable temperature and humidity, solid and level
surface, location with no draft or vibration, indoors out of direct sunlight and a stable power
supply.
□ Do not install on a soft floor or where there is vibration.
□ Do not install where there is wind or large fluctuations in temperature.
□ Avoid locations in direct sunlight.
□ Do not install in locations with strong magnetic fields or strong radio signals.
□ Do not install where static electricity is likely to occur. When humidity is 45% R.H. or less,
plastic and insulating materials are apt to be charged with static electricity due to friction, etc.
□ Unstable AC power supply may cause malfunctions.
□ Remove the protective film from the weighing pan before use.
□ Sensitivity adjustment should be performed for more accurate weighing when the scale is first
installed or when it is moved far. Refer to the [Instruction Manual: FG-CWP Series] on our
website https://www.aandd.jp.
2.2. Precautions for Storing
□ Do not disassemble the scale.
□ If the scale becomes dirty, wipe it with a soft cloth slightly moistened with a mild detergent.
Do not use organic solvents.
□ Do not scrub with a brush or the like.
□ Do not spray with strong jets of water.
4
Tabla de contenido
loading

Tabla de contenido