Connection To The Mains; Use - espresso PRO 2+1 Manual De Uso

20 Manuale d'uso -

CONNECTION TO THE MAINS

THINGS TO CHECK BEFORE CONNECTING
Warning
The power supply voltage of the machine may not be modified by
the user. Before connecting to the mains, check that:
the mains voltage corresponds to the power supply voltage of
the machine, indicated on the identification plate on the rear of
the machine;
- that the plug of the machine's power cable connection fits into
the socket;
- that the socket or the electrical network is connected to a device
protecting against indirect contact (circuit breaker) with a fault
current I∆n not greater than 20mA;
- the outlet is efficiently earthed and controlled;
- the power cable is undamaged.
PROHIBITIONS
Warning
- Do not use extension cords of any kind to connect the machine
to the mains.
- Do not use reduction devices to connect the plug to the outlet.
- Do not use multiple connection devices ("flappers" or triple
outlets) to connect the machine to the outlet.
CONNECTION
Insert the plug (A) in the mains
outlet.
PRO 2+1
user's Manual - Mode d'eMploi - BedienungshandBuch - Manual de uso
A

USE

TURNING THE MACHINE ON
Turn the machine on by
pressing the luminous switches
(A) on the back.
Do not dispense any beverages
until the machine is ready. The
warm-up time is approximately
120 seconds.
OPERATING INSTRUCTIONS
Warning
The capsule must be allowed to slide until it is in its correct
position. Never for any reason use the fingers, utensils or other
objects to force the capsule into the chamber: there is the risk
that the machine could be damaged.
n
o water
Warning
The machine will be irreparably damaged if it operates without
water in the tank.
b
everage brewing
Warning
If the door is not completely closed, the machine will neither
dispense coffee nor hot water.
NEVER, for any reason, use foreign objects to place the capsule
inside the compartment.