Filling The Tank - espresso PRO 2+1 Manual De Uso

Manuale d'uso -
TECHNICAL SPECIFICATIONS
WATER TANK CAPACITY
POWER SUPPLY
FREQUENCY (230 V)
POWER RATING
SIZE AND WEIGHT
HEIGHT
DEPTH
WIDTH
WEIGHT
START UP
Remove the machine from the packaging and place it on a stable
surface that can sustain the weight and near a suitable electrical
socket.
Warning
Keep the packaging and all its parts for future transport.
The warranty is void without the original packaging.
Warning
Leave at least 10 cm around the machine on all sides.
Do not cover the machine with clothes or protective clothes.
user's Manual - Mode d'eMploi - BedienungshandBuch - Manual de uso
5
230
50
2950
410
500
445
27,5

FILLING THE TANK

litres Warning
V The operations described below must be performed with the
Hz machine disconnected from the electrical network.
W
mm
mm
mm
kg
B
C
- Remove water tank cover (A);
- remove the four water suction pipes (B) from the mouth of the
water tank (C) and extract it from its seat;
- rinse it with abundant running water and dry it on the outside;
- fill it with approximately 5 litres of drinking water, preferably with
a low limescale content (less than 25° f - French degrees);
- put the water tank back in its seat;
- fit the limescale filter (D) into the longer hose (B);
- reinsert the pipes previously removed in the holes provided in
the tank;
- replace the cover of the water tank compartment.
Warning
Do not exceed the water tank's capacity.
Make sure that the outside of the tank is not wet. If necessary,
dry it with a cloth.
D
B
A
19
PRO 2+1