Filling With Water; Making Espresso; Getting Hot Water - Black and Decker BXCO850E Manual De Instrucciones

♦ Connect the appliance to the mains.
♦ Press the on/off button (F) Power indicator is illuminated.
♦ The indicators of 1 cup of coffee, 2 cup of coffee and
steam flash, the machine begins heating, after all indica-
tors are solidly on, the preheating is completed
♦ Without fitting the filter holder (or with the filter holder
fitted, but without coffee), place a recipient under the
steam pipe (I)
♦ Open the steam knob (R) by turning counterclockwise
♦ Press the G2 Coffee Button.
♦ Water will exit through the steam pipe. Wait until approxi-
mately one cupful has exited
♦ First time you will use the machine, there is no water on
the boiler, so it could be possible you need to repeat this
operation before getting water
♦ To finish serving, as quantity of liquid is programmed, it
will stops automatically, but you always can stop when
desired. To do it, push again over coffee button to stop
and close the steam knob (R) by turning clockwise
♦ This will complete the priming operation.

Filling with water:

♦ The tank must be filled with water before turning the
appliance on.
♦ Remove the water tank.
♦ Fill the tank taking care to observe the MAX level
♦ Replace the tank in its housing, ensuring that it is well
fitted.
Filling of coffee:
♦ Remove the filter holder.
♦ Position the ground chosen coffee filter (L or M) in the
filter holder
♦ We recommend using natural toast coffee, as using
roasted coffee may affect the operation of the machine.
♦ Fill the removable filter with ground coffee (6 to 7 gr per
cup to be prepared).
♦ If you wish to make 1 coffee, use 1 filter coffee (L), fill the
ladle (1 spoonful) and take the capacity of the measuring
spoon as the measure for one coffee.
♦ For 2 coffees, use 2 cups filter (M), and put in 2
spoonfuls.
♦ Next lightly press down the ground coffee with the back
of the spoon.
♦ Fit the filter holder in the appliance once more.
♦ Position the filter holder in the coffee assembly by
inserting the assembly from below to inserting position
and turning it from left to right until it locks.
(Original instructions)
USE

Making Espresso

♦ Before connecting the machine, check that steam control
(R) is closed, turning clockwise.
♦ Connect the appliance to the mains.
♦ Turn the appliance ON pushing the on/off button(F).
♦ The indicators of 1 cup of coffee, 2 cup of coffee and
steam flash, the machine begins preheating. After all
indicators are solidly on. It means right temperature is
reached.
♦ Place one or two preheated cups at the filter holder
outlet.
♦ Press the coffee Button (G1 or G2). The coffee infusion
will begin to exit.
♦ The coffee will stop automatically when reached the
standard quantity.
To Customize the volume of coffee
♦ Press and hold 1cup button for 3 seconds, 1cup button
flashes, entering setting mode, press 1cup button again
to start dispensing coffee, when the specified time is
reached, press 1 cup button to complete setting which
can be memorized by the unit. You can do same for 2
cups button.
♦ Once serving has finished, wait a few seconds and
remove the cups with the coffee.
♦ Remove the filter holder and empty the grounds from it.
♦ Wash the filter holder with running water and dry it well.
♦ Check that the removable filter is perfectly fitted into the
filter holder.
♦ Fit the filter holder in the appliance once more.

Getting hot water:

♦ Put the device in ON situation, pressing the button ON/
OFF (F).
♦ The indicators of 1 cup of coffee, 2 cup of coffee and
steam flash, the machine begins preheating. After all
indicators are solidly on, the preheating is completed.
This situation indicates that the water has reached the
temperature.
♦ Place a container under the nozzle (I).
Open the steam control (R), by turning counterclockwise.
♦ Press one of coffee outlet button (G1G2).
♦ Please refer to the operation described in the section of
"Making Espresso" when need to adjust the working time
for making hot water.
♦ The hot water began to come out of the vaporizer.
♦ Once obtained the desired amount of hot water, press
the coffee outlet button (G1 or G2) again, which stops
ENGLISH
5