Notes For The Breast Milk Container And Teat; Key Parts (Figure O); Taking The Pump Apart (Figures A To F); Cleaning And Sterilising - NUK JOLIE Instrucciones De Uso

3.4 Notes for the Breast Milk
Container and Teat
For your
health: WARNING!
1 Silicone cushion
2 Breast shield
3 Slot for pump rod
4 Pump lever
5 Handle fixture
6 Pump rod
7 Pump diaphragm
8 Catch for handle
5. Taking the pump apart
1. Take the silicone cushion 1 out of the
breast shield 2 (Fig. A).
2. Holding the end of the handle, carefully
pull the pump lever 4 straight upwards,
until the handle fixture 5 slips out of the
catch for the handle 8 (Fig. B).
Attention! Don't pull/turn the pump lever
sideways, otherwise the pump rod may
break.
3. Carefully remove the pump lever 4 from
the pump rod 6 (Fig. B).
Warning!
Hygiene is of the utmost priority
when handling breast milk and all
parts that come into contact with it.
The pump should therefore only
be used in a clean and sterile
condition.
Clean, sterilise and quickly dry all
parts before using for the first time
and immediately after each use.

6.1 Cleaning

Caution! To avoid damaging the lip valve 9,
clean it carefully. We recommend just
child's safety and
4. Key parts

6. Cleaning and sterilising

Please read carefully the enclosed
information on use and warnings for
the NUK breast milk container /
bottle and teat, as well as the
accessories.
(Figure O)
9 Lip valve
10 NUK Breast Milk Container
11 Sealing disc
12 Teat
13 Screw ring
14 Protective cap
15 Stand for NUK Breast Milk Container
(Figures A to F)
4. Take the pump diaphragm 7 and pump
rod 6 out of the breast shield 2 (Fig. C).
5. Ease the pump rod 6 out of the pump
diaphragm 7 (Fig. D).
6. Unscrew the
Container 10 from the breast shield 2
(Fig. E).
7. Pull the lip valve 9 out of the breast shield
2 (Fig. F).
8. Finally, clean the individual parts as
described in "6. Cleaning and sterilising".
rinsing off the lip valve and boiling it to
sterilise. Cleaning implements could cause
damage.
1. Clean all parts with warm water and a
little washing-up liquid (or NUK Baby
Bottle Cleanser).
2. Rinse off all parts in running water.
Warning! Milk residues may
damage the material and result
in microbial growth.
The parts should not be cleaned
Caution!
in a dishwasher – dishwasher detergents
can cause material damage.
16
NUK Breast Milk