Tabla de contenido
Idiomas disponibles
Idiomas disponibles
EN
4.1 ANTI -HIGH TEMPERATURE
ta =40°C
Please don't use the equipment if the temperature above 40
4.2 TO PREVENT FALLING WOUNDING
When Hang the fixture, please must verify that the facilities to be able to withstand at least 10
times or more weight of fixtures.
Please make sure the Mounting hardware is strong enough no any damage, and insurance for
the safety rope as auxiliary security fixed in other facilities will need to verify before installation.
Installing or removing the equipment, to make the pulley below the work location
4.3 UA PROTECTION
Forbid straight viewpoint with exposed bulbs to avoid UV damage to the eyes;
Do not use the equipment without the lens screen and the lid;
The lens and the light head covers should be timely replaced if any damage to rupture
4.4 PREVENTION OF ELECTIC SHOCK
The electrical connection must only be carried out with corresponding qualifications;
Before installing, make sure you use the power voltage must comply with the
identified power, voltage and have an overload or leakage protection;
Each fixture must be properly grounded, installed in accorda nce with the relevant standards;
Cut off the power when stall or replace the lamp and the fuse;
Forbid using t he fixture in storm or wet environment.
4.5 TO PREVENT BURNING OR FIRE
1. The fixture can't be mounted directly on the surface of ordinary combustible material.
2. The equipment must be installed away from inflammable and explosive materials.
3. The highest temperature is 40 ° C when the equipment is in stable state.
4. The equipment can not have an obstacle at least in the range of 0.5 meters.
5. Do not replace the non-original parts.
5. Packing and Shipping
5.1 ATTACHMENT
Attach follow accessory.
Safety Rope( charge)
SIDIUS LED 285/4
Content
User Manual
DMX Cable
User Manual/Manual de uso
℃
Quantity
1
1
1
.
3
Tabla de contenido
