Tabla de contenido
Idiomas disponibles
Idiomas disponibles
2. Specificactions and Technical Features
Power Supply
Power
Weight
Lamp Model
3. Use and Operation
1. Installing the Bulb
Loosen the screw for the lamp holder , turn out the lamp holder, insert the bulb
into the lamp holder, note that the lamp should be aproximately perpendicular to
the lamp holder and the screw down the screw for lamp holder .
2. Adjusting
This multiprofile has an adjustable lighting angle. The diameter of the light can be
enlarged or reduced by adjusting the position of the lens. The range of change is
25º - 50º.
1) Turn loose the front and back focus-changing knob below the lamp barrel.
2) Slide the lens forwards or backwards to get the desired light beam edge.
3) Fasten the front and back focus-changing knob after ther focus of the light beam
is adjusted properly.
3. Gobo Holder
If you want to get the effect of the design, you must firstly make the design gobo
showing inverse images. Placing it in the slot and then move it forward until
the Design Bayonet comes out and then insert thedesign flake. Turn on the
light, adjust the Front Drawtube until getting the clearest design, then
fasten the Front Drawtube.
4. Color Effect
If want a color effect, please clip the color filter with the filter holder , open the
color frame clip and insert it.
5. Cleaning the lens
Note. If the surface of the lens has been damaged obviously, please change the
lens.
Warning. Never use a detergent for glasses or windows, or the rigid cloth to clear
lens, because the detergent for glasses and windows can pollute the surface of
the lens and this type of cloth can damage the surface of the lens. Use a soft cloth
lightly wet with water.
MULTIP. ZOOM Lite 25-50
AC 230 V 50/60 Hz
750 W
Approx. 6 Kg
G 9.5
User Manual/Manual de uso
Pag. 2
EN
Tabla de contenido
