Mark SIDIUS LED 285/4 Instrucciones De Usuario página 6

EN
3. Fix the hang fixture into the hole, which located on the base of the light.
Seize handle of fasteners, clockwise rotate 1/4 turn and lock. Installed other one fastener
the same method.
As the pictures show, the two square holes in the center of the base is the safety rope junction.
4. Using the safety cable which can withstand 10 times the weight of the equipment.
5. Make sure the X,Y protect locks are opened, Verify that within 0.5 meters there is no
combustibles .
6.3 EQUIPMENT CONNECT
Attention! One product only can accept one input and one output.
SIDIUS LED 285/4 has DMX input and output 3pin and 5pin connection socket.
Pin 1, FOR GROUND; Pin 2 connected to the negative polar ity signal; The pin
3connected to the positive polarity signal.
DMX512 cable must use the professional shielded twisted pair cable.
SIDIUS LED 285/4 User Manual/Manual de uso
in
5