Lionelo Fie Manual Del Usuario página 6

3.
Pull the middle part of each top rail covered with material so that they fit
into place.(see fig. 3).
4.
Push the middle lock until the surface is completely flat (see fig. 4).
5.
Place the mattress in the baby playpen (see fig. 5).
Baby playpen folding instruction
1.
Remove all the playpen accessories. Grasp the center handle located in the
middle of the floor and pull it up (see fig. 6).
2.
To unlock the upper rails, press the indicated buttons on each side of them.
Pull it slightly up and then push it down (see fig. 7).
3.
While still pulling up the handle, lift the floor of the baby playpen and fold
the legs (see fig. 8).
4.
Wrap the folded playpen with the mattress and fasten it with Velcro straps.
Put the folded baby playpen into the bag (see fig. 9).
Cleaning
Wash the product with a wet cloth and then allow to dry.
The product has been tested and meets all the requirements
The pictures in this manual are for illustrative purposes only.
EN
of the following standards: EN 12227:2010
Therefore, they may differ from the actual product.
‑ 6 ‑