Charge The Camera - Reolink Go PT Manual De Instrucciones

NOTE: You may also run into the following situations:
Voice Prompt
"SIM card cannot be Camera cannot recognize
1
recognized"
"The SIM card is locked
2 with a PIN. Your SIM card has a PIN.
Please disable it"
"Not registered on
network. Please activate Camera fails to register to
3
your SIM cardand check the operator network.
the signal strength"
"Network connection Camera fails to connect
4
failed"
"Data call failed. Please
The SIM card has run out
confirm your cellular data
5 of data or APN settings
plan is available or import
the APN settings"
9 English
Camera Status Solutions
1. Check if the SIM card is facing the
reverse direction.
this SIM card. 2. Check if the SIM card is not fully
inserted and insert it again
Put the SIM card into your mobile
phone and disable the PIN.
1. Check whether your card is
activated or not. If not,
please call your operator
to activate the SIM card.
2. The signal is weak at the current
position. Please move the camera
to a location with better signal.
3. Check if you are using the
correctversion of the camera.
The camera will be in Standby
to the server. mode and reconnect later.
1. Please check whether the
data plan for the SIM card
is still available.
are not correct. 2. Import the correct APN
settings to the camera.

Charge the Camera

It's recommended to fully charge the battery before mounting the camera outdoors.
Charge the battery with a power adapter.
(not included)
Charging Indicator:
Orange LED: charging Green LED: Fully charged
For better weatherproof performance, please
always cover the USB charging port with the
rubber plug after charging the battery.
Charge the battery with the Reolink Solar Panel
(not included if you only purchase the camera).
English 10