Camera Introduction; Set Up The Camera; Insert The Sim Card - Reolink Go PT Manual De Instrucciones

Camera Introduction

Status LED
Lens
Built-in PIR Sensor
Daylight Sensor
Built-in Mic
Nano SIM Card Slot
* Rotate the camera's lens to find the reset hole,
SIM card slot and SD card slot.
Reset Hole
* Press the reset button with a pin to restore
camera to factory settings.
Micro SD Card Slot
Speaker
Micro USB Port
Battery Status LED
Antenna
Power Switch
* Please always cover the USB charging port with
rubber plug after charging the battery.
3 English
Nano SIM
RST
MicroSD
Nano SIM
RST
MicroSD

Set up the Camera

Activate SIM Card for the Camera
Nano SIM
• Choose a Nano SIM card that supports WCDMA and FDD LTE.
RST • Some SIM cards have a PIN code. You may use your smartphone to disable the PIN first. MicroSD
NOTE: Do not insert the IoT or M2M SIM into your smartphone.

Insert the SIM Card

Rotate the camera lens, and remove the rubber cover.
English 4