Schematic Diagram; Remote Control; Basic Operation - AgfaPhoto AF 5085S Guia Del Usuario

1
4 5
2 3

Schematic Diagram

( See 1 )
1: Function keys.
2: Power Button
3: SD/MMC/MS
4: USB Port
5: DC 5V Jack

Remote Control

( See 2 )
1. : Standby button,to turn on/off backlight
2. : Switch the media among the memory card USB internal flash.
3. MENU MENU : Display slide menu
4. : Back to the slideshow
5. : Cursor up
6. : Cursor down
7. : Back to the previous menu
8. : Go into the submenu
9. : Validation button.
10. : Copy the selected picture to the inernal memory
11. : D elete the picture from the internal memory
12. : Skip to the previous photo
13. : Skip to the next photo
14. : Play or pause slideshow
15. : Modify Slideshow timing to 5s, 10s, 30s or 60s
5...60s
16. : Change the photo display ratio: 4/3, 16:9, Stretch
17. : Rotate the picture of 90 degrees in clockwise direction
5
All manuals and user guides at all-guides.com
, ,
How to USE the remote Control
Installing the Battery in the Remote Control
Remove the battery cover on the rear of the remote control and insert the
battery. Make sure the polarities (+ and - ) are aligned correctly.
Note:
Normally the batteries will last for around one year, if remote control does
not work, please replace the batteries.
If the player is not used for a long time, take out the batteries to prevent
leakage and possible damage to the remote control.
Do not mix new and old batteries. Never mix different types of batteries.
CAUTION! RISK OF EXPLOSION IF BATTERY IS REPLACED BY ONE OF AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
How to use the remote control
Point the remote control to the remote sensor on the player front panel. It's
working limits are within an angle of 15 degrees and a distance of 3m. When using
the remote Control, no obstacle should be placed between the remote control and
remote sensor.

Basic Operation

Getting Started
Assemble the player bracket on the back to prop the player up, insert adapter DC
plug into the player first, then plug adapter into a standard outlet.
Once you have photos on the memory card or USB device, insert the card or
USB device into the proper slot. Do not force the card into the slot.
Once power on, the player will slideshow automatically.
Press the power key for about 3 seconds, the screen will display the open menu.
Note:
The player will select one memory card to play at a time even though more
might be installed. If you insert a memory card and USB device at the same
time, the player will play the file on the memory card first, and then
the player will start photo slideshow.
6