Safety information
Electrical connection
Only connect the unit if the electrical data of the unit and the power supply match.
Only plug the unit into a correctly installed outlet. Ensure that the unit is fused for a rated
fault current of max. 30 mA by means of a fault current protection device.
Extension cables and power distributors (e.g. outlet strips) must be suitable for outdoor use
(splash-proof).
Protect open plugs and sockets from moisture.
Safe operation
Operate the unit only when there are no people in the water.
Do not use the unit, if electrical lines or the housing are damaged.
If a power connection cable is damaged, have it replaced immediately by OASE, an authorized
customer service or a qualified electrician to prevent electric shock.
Do not carry or pull the unit by its power cable.
Route lines so that they are protected from damage and nobody can trip over them.
Never make technical modifications to the unit.
Only carry out work on the unit that is described in this manual.
Only use original spare parts and accessories.
Should problems occur, please contact the authorized customer service or OASE.
Intended use
Only use the product described in this manual as follows:
For pumping clear water or rain water.
For pumping chlorinated water.
For pumping dirty water containing particles max. 40 mm in size.
For irrigating and watering.
For transferring water from and draining basins or ponds/pools.
For pumping the water out of rain barrels or cisterns.
In compliance with the technical specifications. (→ Technical data)
The following restrictions apply to the unit:
Not suitable for salt water.
Not suitable for drinking water.
Do not use for long-term operation (e.g. continuous recirculation of water in a pond).
Do not use for industrial purposes.
Do not use in conjunction with chemicals, foodstuff, easily flammable or explosive substances.
Do not connect to the drinking water supply.
12