Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Balancing the Brushcutter
1
3
2
:
Attach the spring hook (1) to the
clamp (2) on the drive tube.
:
Loosen the screw (3).
:
Slide the clamp up or down the drive
tube as necessary.
:
Tighten the screw moderately.
:
Let go of the brushcutter and check
to see how it is balanced.
FS 110
1
2
A
Cutting tools
Mowing heads, grass cutting blades
and brush knife should just touch
the ground.
B
Circular saw blades
should "hover" about 8" (20 cm)
above the ground.
:
Tighten the screw (3) firmly.
Disconnecting brushcutter from
harness
:
Press down bar on spring hook (1).
:
Pull clamp (2) out of the spring
hook.
Starting / Stopping
the Engine
STOP-
A
B
Controls
Control handle on bike handle
Throttle trigger interlock (1)
Throttle trigger (2)
Slide control (3)
English / USA
START
4
5
6
3
7
2
1
33
Capítulos
Tabla de contenido
