Stihl FS 110 Manual De Instrucciones página 14

!
Warning!
Never test the ignition system with
ignition wire boot removed from spark
plug or with unseated spark plug, since
uncontained sparking may cause a fire.
!
Warning!
Do not operate your brushcutter if the
muffler is damaged, missing or modified.
An improperly maintained muffler will
increase the risk of fire and hearing loss.
Never touch a hot muffler or burn will
result. If your muffler was equipped with
a spark-arresting screen to reduce the
risk of fire (e.g. in the USA, Canada and
Australia), never operate your brush-
cutter if the screen is missing or
damaged. Do not modify or remove any
part of the muffler or spark arresting
screen. Remember that the risk of forest
fires is greater in hot or dry weather.
Keep cutting tool sharp. Tighten all nuts,
bolts and screws, except the carburetor
adjustment screws, after each use.
Additionally, the daily maintenance
schedule for your brushcutter set forth in
your STIHL Owner's Manual should be
strictly followed.
FS 110
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of this manual.
Store brushcutter in a dry, high or locked
location out of reach of children.
Before storing for longer than a few
days, always empty the fuel tank. See
chapter „Storing the machine".
English / USA
USING THE CUTTING TOOLS
For an illustration of the various cutting
tools and instructions on proper
mounting see the chapter on "mounting
the cutting tools" in your owner's
manual.
Using the mowing heads
Do not use with mowing line longer than
the intended diameter. With a properly
mounted guard, the built-in cutter will
automatically adjust the line to its proper
length. Overly long lines can overload
the engine, resulting in damage to the
clutch mechanism and nearby parts.
13