Dedicated Flash Functions - Metz MECABLITZ 44 AF-1 digital Manual De Instrucciones

• If the housing has been damaged in
such a way that internal components are
exposed, the flash unit may no longer
be used. Remove the batteries!
Do not touch any internal components.
HIGH VOLTAGE!
• After a series of flashes with full power
and short intervals, a pause of at least
3 minutes must be observed after each
series of 20 flashes!
• When taking a series of flash shots at
full light output and with rapid recycling
times, and with zoom positions of
35 mm and less, the diffuser heats up,
due to the high level of thermal energy.
• This flash unit may be used in combina-
tion with a camera-integrated flash only
if the flash can be folded out completely.
• Rapid changes in temperature may lead
to condensation. If this occurs, allow
time for the unit to become acclimatized.
• Do not use any toxic batteries or rechar-
geable batteries!

2 Dedicated flash functions

Dedicated flash functions are flash func-
tions that have been specially adapted to
a given camera system. Depending on the
type of camera, different flash functions
are supported.
44AF-1 Canon
• Flash-ready indication in camera
viewfinder
• Automatic flash sync speed control
• E-TTL / E-TTL II flash mode
• Automatic fill-in flash control
• Manual flash exposure correction for
E-TTL / E-TTL II
• Flash exposure storage FE with
E-TTL / E-TTL II
• 1st or 2nd curtain synchronisation
(REAR)
• Automatic motor zoom control
• Automatic AF measuring beam control
• Programmed auto flash mode
(AUTO FLASH)
• Wireless Canon E-TTL remote flash
mode
• Wake-up function for the flash unit
• Firmware update via USB connector
k
85