Operation - Kärcher K 2.800 eco!ogic Manual Del Usuario


All current-conducting parts in the working
area must be protected against jet water.

The appliance may only be connected to an
electrical supply which has been installed in
accordance with IEC 60364.

The appliance may only be connected to al-
ternating current. The voltage must corre-
spond with the type plate on the appliance.

For safety reasons, we recommend that you
operate the appliance only via a earth-leak-
age circuit breaker (max. 30 mA).
Safety Devices
Caution
Safety devices protect the user and must not be
modified or bypassed.
Power switch
The appliance switch prevents unintentional op-
eration of the appliance.
Lock trigger gun
This lock locks the lever of the trigger gun and
prevents the inadvertent start of the appliance.
Overflow valve with pressure switch
The overflow valve prevents the permissible
working pressure from being exceeded.
If the lever on the trigger gun is released the
pressure switch turns off the pump, the high-
pressure jet is stopped. If the lever is pulled the
pump is turned on again.
Prerequisites for the appliance's
stability
Caution
Create stability for the appliance prior to all work
on or with the appliance to prevent accidents or
damage.
– The stability of the appliance is warranted
when it is placed onto an even surface.
Scope of delivery
The scope of delivery of your appliance is illustrat-
ed on the packaging. Check the contents of the
appliance for completeness when unpacking.
In the event of missing accessories or any trans-
port damage, please contact your dealer.
Description of the Appliance
These operating instructions describe the maxi-
mum equipment. Depending on the model, there
are differences in the scopes of delivery (see
packaging).
Illustrations on Page 2
1 High pressure connection
2 Appliance switch "0/OFF"/ „I/ON"
3 Storage hook for high pressure hose and
mains connection cable
4 Carrying handle
5 Transport handle, detachable
6 Storage for spray lance
7 Storage for trigger gun
8 Water connection with integrated sieve
9 Detergent suction hose (with sieve)
10 Coupling element for water connection
11 Suction hose
12 Mains cable with mains plug
13 Bearing wheel
14 Trigger gun
15 Lock trigger gun
16 Clamp for high pressure hose
17 High pressure hose
Optional accessories
18 Rotary washing brush
19 Washing brush
20 Spray lance with high pressure nozzle
21 Spray lance with Dirtblaster
22 Spray lance with pressure regulation (Vario
Power)
Mount loose parts delivered with appliance prior
to start-up.
Illustrations on Page 3

Illustration
Insert the transport wheels and lock them.

Illustration
Attach the transport handle /carrying handle.

Illustration
Pull out the clamp for the high-pressure hose
from the hand spray gun (e.g. a Philips
screwdriver).
– 6
EN

Operation

Before Startup
13