Cleaning, Care And Maintenance; Troubleshooting - Waring Commercial WVS50 Manual

CLEANING, CARE AND MAINTENANCE

Always unplug the appliance before performing any cleaning
and maintenance operations.
NOTE: Be sure to wash all parts thoroughly to avoid food-
borne illness.
1. Rotate the suction base to the unlock position and pull it
outward to remove. Rinse the suction base with warm soapy
water.
2. The rubber inner suction nozzle is removable for cleaning.
Wash with warm soapy water.
3. Clean The Pistol Vac charging base and the suction base
with a non-abrasive cloth.
4. Ensure that parts are completely dry before reassembling.

TROUBLESHOOTING

The unit will not charge:
1. Check that the unit is properly connected with the charging
base so that the LED is illuminated.
2. Be sure that the electric outlet is working properly.
3. B e sure you are using the provided battery charger, model
number YLS0301A-T075250, to charge the unit.
Air is not removed from the bag completely:
1. Bags are not sealed: re-align the zipper and be sure the
entire zipper is closed.
2. Make sure the valve is clean. You may need to replace the
zip bag.
3. Extend the vacuum sealing time.
The LED lights go out during charging:
1. The battery is too hot; when it cools down the LED lights will
return to normal.
2. The battery is damaged; you need to replace it.
8