About This Documentation; Required And Supplementary Documentation - Bosch Rexroth NEXO Serie Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 84
Nexo | 36088703D0/2014-04
1
Outdated documentation!
If you use an outdated version of the present documentation as well as the required
and supplementary documentations, this may lead to an incorrect assembly and
operation of the product.
This chapter contains general information on these instructions.
1.1
This documentation applies to the following product:
• Nexo
This documentation aims at persons commissioned with the assembly, commissioning, maintenance,
troubleshooting and disassembly of Rexroth hand-held nutrunners and their components.
This documentation contains important information on the safe and appropriate assembly, transportation,
commissioning, operation, use, maintenance, disassembly, simple troubleshooting and disposal of the
product.
1.2
Table 1:
LSA Control S.L. www.lsa-control.com [email protected] (+34) 960 62 43 01

About this documentation

Make sure that you always have and use the current version of any
documentation. The current version of the documentation of Bosch Rexroth can
be found in the media directory:
http://www.boschrexroth.com/Media Directory
Scope of the documentation
Read this documentation completely and pay particular attention to chapter "Safety instructions",
before working with the product.

Required and supplementary documentation

Only commission the product if you have the documentations marked with the
disposal and have understood and observed them.
Required and supplementary documentation
Title
Safety Instructions for Rexroth Tightening Systems
Documentation of the machine or system
manufacturer
Instructions for the other system components
Generally applicable, legal and other binding
regulations of European and national legislation
Provisions for accident prevention and environmental
protection applicable in your country
DIN 13 sheet 13
Additional information on project planning can be
found in the project planning manual of the Rexroth
Tightening System
NOTE
Document number
3 608 870 2DE
3 608 870 A47
Bosch Rexroth AG
23/264
book symbol at your
Document type
Safety regulation
Project planning manual
Betriebsanleitung | AB
Tabla de contenido
loading

Tabla de contenido