Replacing A Monitor; Use; Answering A Visitor; Opening The Gate - SOMFY V100+ Manual De Instalación

EN
Cut the power supply to the monitor to be replaced.
[1]. Detach the monitor from its mounting bracket.
[2]. Remove the DC connector from the rear of the replacement monitor, and connect the cable from the mains power adapter to this connector: white wire with black marks on the right (+) and all-white wire on the left (-), or the cables leading from
the DIN rail power supply.
[3]. Connect the mains power adapter connector or DIN rail compatible mains adapter connector to the DC input at the rear of
the replacement monitor in the direction shown in the illustration (screws to the right); the direction in which the wires are
connected to the power adapter is important.
Important: It is essential to use the mains power adapter provided or the DIN rail mains adapter to power the replacement
monitor.
Connect the door station to the M- and M+ connectors, on the rear of the replacement monitor:
- terminal M+ on the door station to terminal M+ on the monitor
- terminal M - on the door station to terminal M - on the monitor
Note: if the monitor replaced is the main monitor, make sure that parameter
secondary monitor, make sure that parameter
[4]. Clip the replacement monitor onto the mounting bracket.
Note: position the mains power adapter or DIN rail mains adapter wires between the mounting bracket and the monitor.
3
Monitor
Finish all of the wiring before connecting the
monitor to the mains power supply.

5.1 Answering a visitor

When a visitor presses the call button on the door station, the monitors play 1 ring tone, and an image of the visitor is displayed
on the 2 screens.
Press the button on monitor 1 to communicate with your visitor from monitor 1, or on monitor 2 to communicate with your
visitor from monitor 2, or both monitors to communicate with your visitor from both monitors.
Note: You can communicate with your visitor for a maximum of 2 minutes.
If you press the button again on one of the monitors, only the screen on this monitor is switched off.

5.2 Opening the gate

With the monitor screens on or off, press the
If the monitor screens were on, they will switch off when the gate opens/closes.

5.3 Unlocking the electric latch/lock

With the monitor screens on or off, press the
If the monitor screens were on, they will switch off when the electric latch / lock is unlocked.
5
4. REPLACING A MONITOR
is at 2.
1
2
To the door station
5. USE
button.
button.
is at 1. If the monitor replaced is the
1
2
4
Copyright © 2020 Somfy Activités SA. All rights reserved.