Layout And Function - Festo EduTrainer 576616 Manual De Utilización

9 Layout and function

The AC measuring board EduTrainer
A4 frame.
4
7 L DI+
N DI-
max. 250V / max. 10A / 50:1
6
I1
I2
I3
VN
PE
5
!
A 3-phase voltage system (L1, L2, L3) can be measured with the help of the Siemens Sentron PAC3200. The
following electrical quantities can be read from the measuring instrument's multi-line display: voltage,
current, apparent, active and reactive power, power factor, frequency, voltage/current distortion factor and
asymmetrical voltage/current logging, and the following additional functions are also available: minimum-
maximum values, active and reactive energy, dual tariff recording, average power demand MIN/MAX,
operating hours meter, energy meter and limit value monitoring.
Contactless current measurement is implemented with the help of current transformers.
The transformation ratio is 35:1.
The protective conductor must be plugged in first. Continuity to the protective
conductor of the electrical installation must be assured.
24
®
is enclosed in a housing. The EduTrainer
1
6
DO+ 2
3
DO-
TCP/IP
4
I1'
1 PAC3200 measuring instrument
2 Floating switching output and meter input
I2'
3 Ethernet port
I3'
4 Measuring current outputs
5 PE socket
VN'
6 Voltage and current measuring inputs
PE
5
7 Supply power, L and N,
PAC3200
®
is only suitable for use in an
via 4 mm safety sockets
© Festo Didactic 8060940